|
|
|
National Stock Number:
4330-01-502-7259
Federal Supply Class:
4330
National Item Identification Number:
015027259
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| B08-300-M3MA | 4M588 | BARBEE VALVE & SUPPLY INC | | B73G-3AK-QD3-RMG | 4M588 | BARBEE VALVE & SUPPLY INC |
|
Techincal Specification:
| DROP PRESSURE | 15.0 POUNDS PER SQUARE INCH | | BODY HEIGHT | 10.190 INCHES NOMINAL | | BODY LENGTH | 2.680 INCHES NOMINAL | | DESIGN TYPE | NONREUSABLE | | DISTANCE FROM BOTTOM OF BODY TO CENTER OF INLET | 6.150 INCHES NOMINAL | | FILTERING MEDIA DESIGN | SINTERED SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 40.0 NOMINAL | | FLOW DIRECTION | INSIDE OUT | | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILTER/REGULATOR | | MATERIAL | ALUMINUM BODY | | MEDIA FOR WHICH DESIGNED | AIR | | SPECIAL FEATURES | MAX PRESSURE, METAL BOWL: 250 PSIG; AIR SUPPLY MUST BE DRY ENOUGH TO AVOID ICE FORMATION AT TEMP BELOW 35 DEG FAHRENHEIT; APPROX FLOW 150 PSIG INLET PRESSURE, 90 PSIG SET PRESSURE, DROP OF 15 PSIG FROM SET; BONNET, ALUMINUM; VALVE, BRASS; ELASTOMERS, NEOPRENE AND NITRILE; PANEL MOUNTING HOLE DIAMETER, 1.89 IN.; PANEL THICKNESS, 0.06IN. TO 0.25IN. | | STYLE DESIGNATOR | STRAIGHT FLOW BASKET STRAINER W/ BOLTED COVER |
|
|