|
|
|
National Stock Number:
4330-01-506-2918
Federal Supply Class:
4330
National Item Identification Number:
015062918
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 4330PL0919698 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 5716372 | 9C234 | AM GENERAL LLC | | 870889A | 76700 | CUMMINS FILTRATION INC. |
|
Techincal Specification:
| DESIGN TYPE | NONREUSABLE | | BODY DIAMETER | 4.000 INCHES NOMINAL | | BODY INSIDE DIAMETER | 1.620 INCHES NOMINAL | | BODY THICKNESS | 1.850 INCHES NOMINAL | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FLOW DIRECTION | INSIDE OUT | | MATERIAL | PAPER FILTERING MEDIUM | | III STYLE DESIGNATOR | ROUND (BASICALLY FLAT W/ OPENING) | | PART NAME ASSIGNED BY CONTROLLING AGENCY | POWER STEERING FILTER ELEMENT | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | SPECIAL FEATURES | GROMMET O.D. 2.25 IN., FILTER CONSIST OF PLEATED MEDIA, OUTER BODY, 2 END CAPS, GROMMET, PLASTISOL AND SILKSCREEN; ITEM AKA: FE, P/S RESERVOIR |
|
|