|
|
|
National Stock Number:
4330-01-569-3563
Federal Supply Class:
4330
National Item Identification Number:
015693563
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| SF6731-MG | 53790 | STAUFF CORP |
|
Techincal Specification:
| STYLE DESIGNATOR | CYLINDRICAL W/ INTEGRAL OUTER CASING | | BODY DIAMETER | 5.100 INCHES NOMINAL | | BODY OVERALL LENGTH | 10.600 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD SIZE | 1.500 INCHES | | MATERIAL | GLASS FIBER FILTERING MEDIUM | | FILTERING MEDIA DESIGN | ENCASED SINGLE FILTERING MEDIA RESPONSE | | DESIGN TYPE | LIMITED | | FILTRATION RATING IN MICRONS | 12.0 ABSOLUTE | | FLOW DIRECTION | OUTSIDE IN | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | TEMP RATING | -32.0 DEG CELSIUS MINIMUM AND | | 100.0 DEG CELSIUS MAXIMUM | | DROP PRESSURE | 200.0 POUNDS PER SQUARE INCH | | DIFFERENTIAL PRESSURE | 80.0 POUNDS PER SQUARE INCH | | FILTERING SURFACE AREA | 7522.0 SQUARE CENTIMETERS | | FILTERING SYSTEM FOR WHICH DESIGNED | DUAL FLOW | | SPECIAL FEATURES | PRE-FILTER ELEMENT;SPIN-ON FILTER ELEMENT,INORGANIC GLASS FIBER,12 MICRON | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN-ON FILTER ELEMENT |
|
|