| FLOW ANGLE | 45.0 DEGREES 1ST END |
| MINIMUM INSIDE BENDING RADIUS | 18.000 INCHES |
| END CONNECTION DESIGN | ELBOW 1ST END |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| FLANGE THICKNESS | 0.330 INCHES NOMINAL 1ST END |
| FLANGE OUTSIDE DIAMETER | 2.000 INCHES NOMINAL 1ST END |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER SPIRALLY LAID STEEL WIRE AND 3RD LAYER SPIRALLY LAID STEEL WIRE AND 4TH LAYER SPIRALLY LAID STEEL WIRE AND 5TH LAYER SPIRALLY LAID STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, CHLOROPRENE |
| HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CONNECTION STYLE | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 1ST END |
| FLANGE STYLE | ROUND W/ OUT BOLT HOLES 1ST END |
| FEATURES PROVIDED | REUSABLE END FITTINGS |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| SPECIFICATION/STANDARD DATA | 81349-MIL-H-52471 GOVERNMENT SPECIFICATION |
| INSIDE DIAMETER | 1.250 INCHES NOMINAL |
| CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| MEASURING METHOD AND LENGTH | 60.000 INCHES NOMINAL WORKING |
| INSIDE SURFACE CONDITION | SMOOTH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND COLD RESISTANT AND OIL RESISTANT AND OZONE RESISTANT |
| OUTSIDE DIAMETER | 2.000 INCHES NOMINAL |
| BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM 1ST END |