| CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| RAISED FACE FLANGE 2ND END |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 87.750 INCHES MINIMUM EXCLUDING END FITTINGS AND |
| 88.250 INCHES MAXIMUM EXCLUDING END FITTINGS |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND |
| 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 800.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 1600.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 3200.0 POUNDS PER SQUARE INCH |
| EXTERIOR COLOR | BLACK |
| OUTER COVERING ENVIRONMENTAL PROTECTION | MILDEW RESISTANT AND |
| OIL RESISTANT |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND |
| OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD AND |
| 1ST LAYER BRAIDED COTTON CORD |
| MINIMUM INSIDE BENDING RADIUS | 7.375 INCHES |
| FLANGE THICKNESS | 0.438 INCHES NOMINAL 1ST END |
| 0.438 INCHES NOMINAL 2ND END |
| INSIDE DIAMETER | 0.844 INCHES MINIMUM AND |
| 0.906 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 1.203 INCHES MINIMUM AND |
| 1.265 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | RAISED 1ST END |
| RAISED 2ND END |
| RAISED FACE HEIGHT | 0.062 INCHES MINIMUM AND |
| 0.064 INCHES MAXIMUM 1ST END |
| 0.062 INCHES MINIMUM AND |
| 0.064 INCHES MAXIMUM 2ND END |
| RAISED FACE DIAMETER | 1.185 INCHES MINIMUM AND |
| 1.187 INCHES MAXIMUM 1ST END |
| 1.185 INCHES MINIMUM AND |
| 1.187 INCHES MAXIMUM 2ND END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| SOLID 2ND END |
| FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 1ST END |
| RECTANGULAR (INCLUDES SQUARE) 2ND END |
| BOLT HOLE DIAMETER | 0.469 INCHES NOMINAL 1ST END |
| 0.469 INCHES NOMINAL 2ND END |
| FLANGE LENGTH | 2.500 INCHES NOMINAL 1ST END |
| 2.750 INCHES NOMINAL 2ND END |
| FLANGE WIDTH | 1.438 INCHES NOMINAL 1ST END |
| 1.562 INCHES NOMINAL 2ND END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.750 INCHES NOMINAL 1ST END |
| 2.000 INCHES NOMINAL 2ND END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.688 INCHES NOMINAL 1ST END |
| 0.812 INCHES NOMINAL 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| STRAIGHT 2ND END |
| SPECIAL MARKINGS | METAL IDENTIFICATION TAG ATTACHED WITH METAL STRAP |
| BOLT HOLE QUANTITY | 4 1ST END |
| 4 2ND END |
| SPECIAL FEATURES | MICROINCH FINISH OF 63 ON BOTH RAISED FACES; BOLT HOLES COUNTERBORE 0.031 IN DEEP BY 0.656 IN DIA |