| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| HYDROSTATIC TEST PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.173 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| MAXIMUM OPERATING PRESSURE | 750.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 13.875 INCHES NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 2.000 INCHES |
| NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.438 INCHES 2ND END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ETHYLENE GLYCOL RESISTANT AND FUEL RESISTANT AND HYDRAULIC SOLUTION RESISTANT AND VIBRATION RESISTANT AND WATER RESISTANT |
| OUTSIDE DIAMETER | 0.343 INCHES NOMINAL |
| SEAT ANGLE | 37.0 DEGREES 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIFICATION/STANDARD DATA | 73342-6851549 MANUFACTURERS SOURCE CONTROL |
| TEMP RATING | -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B 2ND END |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | UNJF 1ST END |
| THREAD SERIES DESIGNATOR | UNJF 2ND END |