| CONNECTION TYPE | THREADED INTERNAL HOSE 1ST END |
| THREADED EXTERNAL HOSE 2ND END |
| MEASURING METHOD AND LENGTH | 600.000 INCHES NOMINAL OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| HYDROSTATIC TEST PRESSURE | 600.0 POUNDS PER SQUARE INCH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED FABRIC AND |
| 2ND LAYER HELIX COPPER COIL AND |
| 3RD LAYER BRAIDED FABRIC AND |
| OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| MINIMUM INSIDE BENDING RADIUS | 4.000 INCHES |
| INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| OUTSIDE DIAMETER | 1.844 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING NICKEL ALLOY 400 ALL ENDS |
| CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 1ST END |
| PLAIN 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| STRAIGHT 2ND END |
| THREAD SERIES DESIGNATOR | NPSH 1ST END |
| NPSH 2ND END |
| NOMINAL THREAD SIZE | 1.000 INCHES 1ST END |
| 1.000 INCHES 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| SPECIFICATION/STANDARD DATA | MIL-H-2217 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION AND |
| 81349-MIL-H-2217 GOVERNMENT SPECIFICATION |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, CHLOROPRENE; FURISHED WITH 1 WASHER,4 1.000 IN. HOSE CLAMPS,1 1.000 IN. HOSE CLAMP UP PER,1 1.000 IN. HOSE CLAMP LOWER,2 COTTER PINS |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-H-2217 |