| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CONNECTION STYLE | SWIVEL NUT WITH LOOSE OR INTEGRAL CLINCH SLEEVE 1ST END |
| CONNECTION STYLE | SWIVEL NUT WITH LOOSE OR INTEGRAL CLINCH SLEEVE 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | NATURAL |
| FLOW ANGLE | 45.0 DEGREES 2ND END |
| HYDROSTATIC TEST PRESSURE | 200.0 POUNDS PER SQUARE INCH |
| INNER CONVEYING TUBE STYLE | ANNULAR CLOSE-PITCH CORRUGATED |
| INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| OUTSIDE DIAMETER | 0.680 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 100.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 7.250 INCHES NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 1.500 INCHES |
| NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.562 INCHES 2ND END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 2ND END |
| SPECIAL FEATURES | MARK DE-ICING |
| TEMP RATING | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD CLASS | 3B 2ND END |
| THREAD CLASS | 3B 1ST END |
| THREAD SERIES DESIGNATOR | UNJF 2ND END |
| THREAD SERIES DESIGNATOR | UNJF 1ST END |
| BURST TEST PRESSURE | 400.0 POUNDS PER SQUARE INCH |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END CONNECTION DESIGN | ELBOW 2ND END |