| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END CONNECTION DESIGN | STRAIGHT 2ND END |
| BURST TEST PRESSURE | 900.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED EXTERNAL PIPE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | PLAIN 2ND END |
| CONNECTION STYLE | SWIVEL NUT, INVERTED FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | BLACK |
| HYDROSTATIC TEST PRESSURE | 450.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED TEXTILE YARN AND 1ST LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| OUTSIDE DIAMETER | 0.750 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 225.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 12.000 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | AIR SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 3.750 INCHES |
| NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.250 INCHES 2ND END |
| NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND 1 CLASS |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND MILDEW RESISTANT AND FUEL RESISTANT AND HYDRAULIC SOLUTION RESISTANT AND OZONE RESISTANT |
| SEAT ANGLE | 30.0 DEGREES 1ST END |
| SPECIAL FEATURES | FURNISHED W/ONE ADPTER ST IPE TO TUBE EXT THDS .250-18 NPTF,0.750-20 UNEF |
| SPECIFICATION/STANDARD DATA | 81349-MIL-H-3992 GOVERNMENT SPECIFICATION |
| TEMP RATING | -60.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD CLASS | 3B 1ST END |
| THREAD SERIES DESIGNATOR | NPTF 2ND END |
| THREAD SERIES DESIGNATOR | UNEF 1ST END |