| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| BURST TEST PRESSURE | 9000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED EXTERNAL PIPE 1ST END |
| CONNECTION STYLE | INVERTED FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | BLACK |
| FEATURES PROVIDED | REUSABLE END FITTINGS |
| HYDROSTATIC TEST PRESSURE | 4500.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.313 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 3RD LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT |
| OUTSIDE DIAMETER | 0.680 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 2250.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 21.500 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | AIR AND FUEL/OIL, HYDROCARBON AND WATER, FRESH AND HYDRAULIC FLUID SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 4.000 INCHES |
| NOMINAL THREAD SIZE | 0.250 INCHES 1ST END |
| SEAT ANGLE | 30.0 DEGREES 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| SPECIFICATION/STANDARD DATA | SAE J517,100R5-81343 NATIONAL STD/SPEC |
| TEMP RATING | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD QUANTITY PER INCH | 18 1ST END |
| THREAD SERIES DESIGNATOR | NPT 1ST END |
| VACUUM IN TORR | 50.8 |