| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 24.137 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 5.500 INCHES |
| OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| OUTSIDE DIAMETER | 1.360 INCHES NOMINAL |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE |
| VACUUM IN TORR | 50.8 |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| END CONNECTION DESIGN | ELBOW 1ST END |
| END CONNECTION DESIGN | STRAIGHT 2ND END |
| END FITTING COMPONENT AND MATERIAL | FLANGE STEEL COMP 304 1ST END |
| END FITTING COMPONENT AND MATERIAL | NIPPLE STEEL COMP 304 ALL ENDS |
| END FITTING COMPONENT AND MATERIAL | NUT STEEL COMP 304 3RD END |
| END FITTING COMPONENT AND MATERIAL | UNION STEEL COMP 304 2ND END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| BURST TEST PRESSURE | 600.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | EXTERNAL QUICK DISCONNECT 2ND END |
| CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| CONNECTION STYLE | RAISED 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| FITTING COMPONENT AND SURFACE TREATMENT | FLANGE PASSIVATE 1ST END |
| FITTING COMPONENT AND SURFACE TREATMENT | NIPPLE PASSIVATE ALL ENDS |
| FITTING COMPONENT AND SURFACE TREATMENT | NUT PASSIVATE 3RD END |
| FITTING COMPONENT AND SURFACE TREATMENT | UNION PASSIVATE 2ND END |
| FLANGE STYLE | ROUND W/ BOLT HOLES 1ST END |
| FLOW ANGLE | 60.0 DEGREES 1ST END |
| INSIDE DIAMETER | 1.130 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| HYDROSTATIC TEST PRESSURE | 400.0 POUNDS PER SQUARE INCH |