| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING COPPER ALLOY ALL ENDS |
| BURST TEST PRESSURE | 500.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 1ST END |
| CONNECTION TYPE | THREADED INTERNAL HOSE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| HYDROSTATIC TEST PRESSURE | 150.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY WRAPPED COTTON FABRIC OR 1ST LAYER SPIRALLY WRAPPED FABRIC AND OUTER LAYER MOLDED RUBBER |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND WATER RESISTANT |
| OUTSIDE DIAMETER | 1.078 INCHES MINIMUM AND 1.140 INCHES MAXIMUM |
| MEASURING METHOD AND LENGTH | 144.000 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | WATER, FRESH SINGLE RESPONSE |
| NOMINAL THREAD SIZE | 1.000 INCHES 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD QUANTITY PER INCH | 11-1/2 1ST END |
| THREAD SERIES DESIGNATOR | NPSH 1ST END |