| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END CONNECTION DESIGN | STRAIGHT 2ND END |
| BURST TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED EXTERNAL PIPE 2ND END |
| CONNECTION STYLE | PLAIN 2ND END |
| CONNECTION STYLE | PLAIN OPTIONAL END 1ST END |
| CONNECTION TYPE | THREADED INTERNAL PIPE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| HYDROSTATIC TEST PRESSURE | 500.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.500 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER POLYTETRAFLUOROETHYLENE IMPREGNATED GLASS FIBER AND 1ST LAYER POLYTETRAFLUOROETHYLENE IMPREGNATED GLASS FIBER AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| OUTER COVERING ENVIRONMENTAL PROTECTION | HEAT RESISTANT |
| OUTSIDE DIAMETER | 1.031 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 140.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 600.000 INCHES NOMINAL EXCLUDING END FITTINGS |
| NOMINAL THREAD SIZE | 0.375 INCHES 2ND END |
| NOMINAL THREAD SIZE | 0.375 INCHES 1ST END |
| SPECIAL FEATURES | HEATING ELEMENT ATTACHED TO EACH COUPLING 0.062 IN. DIA CABLE 7 BY 7 CONSTRUCTION,CRES STEEL WIRE,A RETURN CABLE,MIL-C-915,50 FT LG @TAPED TO HOSE ASSEMBLY,ASSEMBLY USED FOR HOT PLASTIC PAINT SPRAYING |
| TEMP RATING | 400.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | NPT 1ST END |
| THREAD SERIES DESIGNATOR | NPT 2ND END |