| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| THREADED INTERNAL TUBE 2ND END |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 22.000 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND |
| 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND |
| WEATHERPROOF |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID STEEL WIRE AND |
| 2ND LAYER SPIRALLY LAID STEEL WIRE AND |
| 3RD LAYER BRAIDED STEEL WIRE AND |
| OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| MINIMUM INSIDE BENDING RADIUS | 12.000 INCHES |
| INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| OUTSIDE DIAMETER | 1.562 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| SWIVEL NUT FLARE 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| 37.0 DEGREES 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| THREAD SERIES DESIGNATOR | UN 1ST END |
| UN 2ND END |
| NOMINAL THREAD SIZE | 1.312 INCHES 1ST END |
| 1.312 INCHES 2ND END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| 12 2ND END |
| THREAD CLASS | 2B 1ST END |
| 2B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| SPECIFICATION/STANDARD DATA | SAE J517,100R2,TYPE B-81343 NATIONAL STD/SPEC |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |