| CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| RAISED FACE FLANGE 2ND END |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 16.720 INCHES NOMINAL OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND |
| 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 120.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 240.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 720.0 POUNDS PER SQUARE INCH |
| EXTERIOR COLOR | BLACK |
| OUTER COVERING ENVIRONMENTAL PROTECTION | FUEL RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED COTTON CORD AND |
| 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND |
| OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD |
| MINIMUM INSIDE BENDING RADIUS | 11.000 INCHES |
| FLANGE THICKNESS | 0.168 INCHES NOMINAL 1ST END |
| 0.188 INCHES NOMINAL 2ND END |
| INSIDE DIAMETER | 1.380 INCHES NOMINAL |
| OUTSIDE DIAMETER | 1.670 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | RAISED SWIVEL 1ST END |
| RAISED SWIVEL 2ND END |
| RAISED FACE HEIGHT | 0.015 INCHES NOMINAL 1ST END |
| 0.015 INCHES NOMINAL 2ND END |
| RAISED FACE DIAMETER | 2.120 INCHES NOMINAL 1ST END |
| 2.120 INCHES NOMINAL 2ND END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| SOLID 2ND END |
| FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 1ST END |
| RECTANGULAR (INCLUDES SQUARE) 2ND END |
| BOLT HOLE DIAMETER | 0.270 INCHES NOMINAL 1ST END |
| 0.270 INCHES NOMINAL 2ND END |
| FLANGE LENGTH | 2.380 INCHES NOMINAL 1ST END |
| 2.380 INCHES NOMINAL 2ND END |
| FLANGE WIDTH | 2.380 INCHES NOMINAL 1ST END |
| 2.380 INCHES NOMINAL 2ND END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.810 INCHES NOMINAL 1ST END |
| 1.810 INCHES NOMINAL 2ND END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.810 INCHES NOMINAL 1ST END |
| 1.810 INCHES NOMINAL 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 45.0 DEGREES 2ND END |
| FEATURES PROVIDED | REUSABLE END FITTINGS |
| BOLT HOLE QUANTITY | 4 1ST END |
| 4 2ND END |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 81205 |
| DESIGN CONTROL REFERENCE | 10-20051-515 |