| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING COPPER ALLOY ALL ENDS |
| BURST TEST PRESSURE | 700.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED EXTERNAL PIPE 1ST END |
| CONNECTION STYLE | INVERTED FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | NATURAL |
| HYDROSTATIC TEST PRESSURE | 350.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED FABRIC OR 1ST LAYER WOVEN FABRIC OR 1ST LAYER SPIRALLY WRAPPED FABRIC AND OUTER LAYER MOLDED RUBBER |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND OZONE RESISTANT |
| OUTSIDE DIAMETER | 0.578 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| MAXIMUM OPERATING PRESSURE | 175.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 36.000 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 3.000 INCHES |
| NOMINAL THREAD SIZE | 0.250 INCHES 1ST END |
| SEAT ANGLE | 30.0 DEGREES 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| SPECIFICATION/STANDARD DATA | SAE J30,30R2,TYPE 1 NATIONAL STD/SPEC |
| TEMP RATING | -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD SERIES DESIGNATOR | NPTF 1ST END |
| VACUUM IN TORR | 254.0 |