| END CONNECTION DESIGN | ELBOW 1ST END |
| END CONNECTION DESIGN | ELBOW 2ND END |
| END FLANGE CONSTRUCTION | SOLID 2ND END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 90.0 |
| BOLT HOLE DIAMETER | 0.206 INCHES NOMINAL 2ND END |
| BOLT HOLE QUANTITY | 4 2ND END |
| BURST TEST PRESSURE | 3200.0 POUNDS PER SQUARE INCH |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.312 INCHES NOMINAL 2ND END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.312 INCHES NOMINAL 2ND END |
| CONNECTION TYPE | RAISED FACE FLANGE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | RAISED SWIVEL 2ND END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLANGE LENGTH | 1.750 INCHES NOMINAL 2ND END |
| FLANGE THICKNESS | 0.297 INCHES NOMINAL 2ND END |
| FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 2ND END |
| FLOW ANGLE | 45.0 DEGREES 1ST END |
| FLOW ANGLE | 45.0 DEGREES 2ND END |
| FLANGE WIDTH | 1.750 INCHES NOMINAL 2ND END |
| HYDROSTATIC TEST PRESSURE | 1600.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.875 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER RUBBER IMPREGNATED BRAIDED STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD |
| OUTSIDE DIAMETER | 1.234 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 800.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 23.250 INCHES NOMINAL EXCLUDING END FITTINGS |
| MEDIA FOR WHICH DESIGNED | AIR AND ALCOHOL, ETHYL AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 7.375 INCHES |
| NOMINAL THREAD SIZE | 1.312 INCHES 1ST END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | MILDEW RESISTANT AND OIL RESISTANT |
| RAISED FACE DIAMETER | 1.510 INCHES NOMINAL 2ND END |
| RAISED FACE HEIGHT | 0.015 INCHES NOMINAL 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| TEMP RATING | -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD CLASS | 3B 1ST END |
| THREAD SERIES DESIGNATOR | UNJ 1ST END |
| THREAD QUANTITY PER INCH | 12 1ST END |