| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | NIPPLE ALUMINUM ALLOY ALL ENDS |
| END FITTING COMPONENT AND MATERIAL | NUT STEEL 1ST END |
| BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FITTING COMPONENT AND SURFACE TREATMENT | NUT CADMIUM 1ST END |
| FITTING COMPONENT AND SURFACE TREATMENT | NIPPLE ANODIZE ALL ENDS |
| HYDROSTATIC TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.219 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND 3RD LAYER BRAIDED COTTON CORD AND OUTER LAYER MOLDED RUBBER |
| OUTSIDE DIAMETER | 0.625 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 72.000 INCHES NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 3.000 INCHES |
| NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; NIPPLE-ADDITIONAL MATERIAL STEEL,N1PPLE-ADDITIONAL SURFACE TREATMENT CADMIUM |
| SPECIFICATION/STANDARD DATA | 96906-MS28759 GOVERNMENT STANDARD |
| TEMP RATING | -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD CLASS | 3B 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |