| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | NIPPLE STEEL ALL ENDS |
| END FITTING COMPONENT AND MATERIAL | NIPPLE STEEL COMP 304 2ND END |
| END FITTING COMPONENT AND MATERIAL | NUT STEEL COMP 304 1ST END |
| BURST TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY AND REUSABLE END FITTINGS |
| FITTING COMPONENT AND SURFACE TREATMENT | NIPPLE PASSIVATE ALL ENDS |
| FITTING COMPONENT AND SURFACE TREATMENT | SOCKET ANODIZE 3RD END |
| FITTING COMPONENT AND SURFACE TREATMENT | NUT PASSIVATE 1ST END |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| HYDROSTATIC TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.391 INCHES MINIMUM AND 0.421 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| OUTSIDE DIAMETER | 0.546 INCHES MINIMUM AND 0.585 INCHES MAXIMUM |
| MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 11.625 INCHES NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 4.625 INCHES |
| NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.750 INCHES 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 2ND END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE |
| SPECIFICATION/STANDARD DATA | 77272-114PS468 MANUFACTURERS SOURCE CONTROL |
| SUPPLEMENTARY FEATURES | FUEL SYSTEM CRASH RESISTANT/RETROFIT ON CH-47C HELICOPTER |
| TEMP RATING | -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD CLASS | 3B 2ND END |
| THREAD CLASS | 3B 1ST END |
| THREAD SERIES DESIGNATOR | UNJF 2ND END |
| THREAD SERIES DESIGNATOR | UNJF 1ST END |