| END CONNECTION DESIGN | ELBOW 1ST END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 255.0 |
| BOLT HOLE QUANTITY | 4 1ST END |
| BOLT HOLE DIAMETER | 0.265 INCHES NOMINAL 1ST END |
| BURST TEST PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.656 INCHES NOMINAL 1ST END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.656 INCHES NOMINAL 1ST END |
| CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| CONNECTION STYLE | PLAIN 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | NATURAL |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| FLANGE LENGTH | 2.188 INCHES NOMINAL 1ST END |
| FLANGE THICKNESS | 0.325 INCHES NOMINAL 1ST END |
| FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 1ST END |
| FLANGE WIDTH | 2.188 INCHES NOMINAL 1ST END |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| INSIDE DIAMETER | 0.875 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| HYDROSTATIC TEST PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING PRESSURE | 70.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 24.000 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 5.500 INCHES |
| OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| OUTSIDE DIAMETER | 1.156 INCHES NOMINAL |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND 300.0 DEG FAHRENHEIT SINGLE RESPONSE |