| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| MEASURING METHOD AND LENGTH | 22.750 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -67.0 DEG FAHRENHEIT AND |
| 400.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
| EXTERIOR COLOR | NATURAL |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND |
| CORROSION RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY WRAPPED POLYTETRAFLUOROETHYLENE IMPREGNATED GLASS FIBER AND |
| 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND |
| 3RD LAYER SPIRALLY WRAPPED POLYTETRAFLUOROETHYLENE IMPREGNATED GLASS FIBER AND |
| 4TH LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND |
| 5TH LAYER SPIRALLY WRAPPED POLYTETRAFLUOROETHYLENE IMPREGNATED GLASS FIBER AND |
| OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| MINIMUM INSIDE BENDING RADIUS | 3.000 INCHES |
| INSIDE DIAMETER | 0.219 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.480 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
| THREAD CLASS | 2B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE |