| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT, INVERTED FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| HYDROSTATIC TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.313 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD |
| OUTSIDE DIAMETER | 0.592 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 18.312 INCHES MINIMUM OVERALL AND 18.812 INCHES MAXIMUM OVERALL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 2.750 INCHES |
| NOMINAL THREAD SIZE | 0.625 INCHES 1ST END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND COLD RESISTANT AND OIL RESISTANT AND OZONE RESISTANT |
| SEAT ANGLE | 45.0 DEGREES 1ST END |
| TEMP RATING | -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE |
| TEST DATA DOCUMENT | 19207-10942653 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD CLASS | 2A 1ST END |
| THREAD SERIES DESIGNATOR | UN 1ST END |
| THREAD QUANTITY PER INCH | 18 1ST END |