| CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| RAISED FACE FLANGE 2ND END |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 18.625 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND |
| 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 600.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 1400.0 POUNDS PER SQUARE INCH |
| EXTERIOR COLOR | NATURAL |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND |
| CORROSION RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND |
| OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| MINIMUM INSIDE BENDING RADIUS | 3.590 INCHES |
| FLANGE THICKNESS | 0.297 INCHES NOMINAL 1ST END |
| 0.297 INCHES NOMINAL 2ND END |
| INSIDE DIAMETER | 1.781 INCHES NOMINAL |
| OUTSIDE DIAMETER | 2.094 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | RAISED SWIVEL 1ST END |
| RAISED SWIVEL 2ND END |
| RAISED FACE HEIGHT | 0.015 INCHES NOMINAL 1ST END |
| 0.015 INCHES NOMINAL 2ND END |
| RAISED FACE DIAMETER | 2.750 INCHES NOMINAL 1ST END |
| 3.281 INCHES NOMINAL 2ND END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| SOLID 2ND END |
| FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 1ST END |
| RECTANGULAR (INCLUDES SQUARE) 2ND END |
| BOLT HOLE DIAMETER | 0.328 INCHES NOMINAL 1ST END |
| 0.328 INCHES NOMINAL 2ND END |
| FLANGE LENGTH | 3.000 INCHES NOMINAL 1ST END |
| 4.000 INCHES NOMINAL 2ND END |
| FLANGE WIDTH | 3.000 INCHES NOMINAL 1ST END |
| 4.000 INCHES NOMINAL 2ND END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.375 INCHES NOMINAL 1ST END |
| 3.812 INCHES NOMINAL 2ND END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 2.375 INCHES NOMINAL 1ST END |
| 3.812 INCHES NOMINAL 2ND END |
| END CONNECTION DESIGN | ELBOW 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 18.0 DEGREES 1ST END |
| 50.0 DEGREES 2ND END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 28.0 |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY AND |
| INTERNAL SUPPORT |
| BOLT HOLE QUANTITY | 4 1ST END |
| 4 2ND END |
| SPECIAL FEATURES | INTERNAL SUPPORT CONSISTS OF A FLAT STEEL HELICALLY WOUND SPRING |