| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| THREADED EXTERNAL PIPE 2ND END |
| MEDIA FOR WHICH DESIGNED | AIR SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 74.438 INCHES NOMINAL OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND |
| 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 225.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 900.0 POUNDS PER SQUARE INCH |
| VACUUM IN TORR | 50.8 |
| OUTER COVERING ENVIRONMENTAL PROTECTION | COLD RESISTANT AND |
| OZONE RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED COTTON CORD OR |
| 1ST LAYER BRAIDED TEXTILE YARN AND |
| 2ND LAYER BRAIDED COTTON CORD OR |
| 2ND LAYER BRAIDED TEXTILE YARN AND |
| OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| MINIMUM INSIDE BENDING RADIUS | 3.750 INCHES |
| INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.750 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM 1ST END |
| CONNECTION STYLE | SWIVEL NUT, INVERTED FLARE 1ST END |
| INVERTED FLARE 2ND END |
| SEAT ANGLE | 45.0 DEGREES 1ST END |
| 30.0 DEGREES 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| STRAIGHT 2ND END |
| THREAD SERIES DESIGNATOR | UNEF 1ST END |
| NPTF 2ND END |
| NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| 0.250 INCHES 2ND END |
| THREAD QUANTITY PER INCH | 18 1ST END |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| FEATURES PROVIDED | REUSABLE END FITTINGS |
| SPECIFICATION/STANDARD DATA | MIL-H-3992,TYPE 1,CLASS 1 OR CLASS 2 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |