|
|
|
National Stock Number:
4720-00-826-4921
Federal Supply Class:
4720
National Item Identification Number:
008264921
Description:
HOSE ASSEMBLY,NONMETALLIC
Detail:
A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see HOSE, NONMETALLIC. Excludes HOSE ASSEMBLY, AIR DUCT; and HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
|
Manufacturer Information:
| 63A101B80 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | 63A101D9-47 | 17186 | INSTRON LAWRENCE | | 6PQ6PFJS20 | 63906 | CONTITECH USA, INC. | | 6PR-6PFJS-20 | 63906 | CONTITECH USA, INC. | | 6PR-6PFJS-20 | 70434 | ANCHOR SWAN CORP SUB OF AMERACE CORP | | 6PQ6PFJS20 | 70434 | ANCHOR SWAN CORP SUB OF AMERACE CORP | | J517,100R6,SIZE-6 | 0U583 | SAE INTERNATIONAL | | SAE-J517 | 0U583 | SAE INTERNATIONAL | | 6PR-6PFJS-20 | 73842 | GOODYEAR TIRE AND RUBBER CO THE | | J517,100R6,SIZE-6 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | SAE J517,100R6,SIZE-6 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
|
Techincal Specification:
| END CONNECTION DESIGN | STRAIGHT 1ST END | | BURST TEST PRESSURE | 1000.0 POUNDS PER SQUARE INCH | | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END | | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END | | CROSS-SECTIONAL SHAPE STYLE | ROUND | | INSIDE DIAMETER | 0.375 INCHES NOMINAL | | INSIDE SURFACE CONDITION | SMOOTH | | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED COTTON CORD AND OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD | | OUTSIDE DIAMETER | 0.625 INCHES NOMINAL | | MAXIMUM OPERATING PRESSURE | 250.0 POUNDS PER SQUARE INCH | | MEASURING METHOD AND LENGTH | 20.000 INCHES NOMINAL OVERALL | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE | | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END | | SEAT ANGLE | 37.0 DEGREES 1ST END | | TEMP RATING | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE | | TEST DATA DOCUMENT | 30003-63A1 01-B80 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD CLASS | 3B 1ST END | | THREAD SERIES DESIGNATOR | UNF 1ST END |
|
|