| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END CONNECTION DESIGN | STRAIGHT 2ND END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| BURST TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | INTERNALLY AND EXTERNALLY THREADED TUBE 2ND END |
| CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END |
| CONNECTION STYLE | INVERTED FLARE 1ST END |
| CONNECTION STYLE | INVERTED FLARE 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | BLACK |
| FEATURES PROVIDED | REUSABLE END FITTINGS |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING DICHROMATE 1ST END |
| HYDROSTATIC TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.250 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD OR 1ST LAYER RUBBER IMPREGNATED BRAIDED FABRIC OR 1ST LAYER RUBBER IMPREGNATED BRAIDED RAYON CORD AND 2ND LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD OR 2ND LAYER RUBBER IMPREGNATED BRAIDED FABRIC OR 2ND LAYER RUBBER IMPREGNATED BRAIDED RAYON CORD AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 19.375 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | BRAKE FLUID, NONMINERAL OIL SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 3.380 INCHES |
| NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.500 INCHES AND 0.688 INCHES 2ND END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | COLD RESISTANT AND OZONE RESISTANT AND SALT WATER RESISTANT AND WATERPROOF |
| OUTSIDE DIAMETER | 0.590 INCHES NOMINAL |
| SEAT ANGLE | 45.0 DEGREES 1ST END |
| SEAT ANGLE | 45.0 DEGREES 2ND END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; OUTSIDE @COVER OF HOSE IS RIBBED |
| SPECIFICATION/STANDARD DATA | SAE J1401-81343 NATIONAL STD/SPEC |
| TEMP RATING | -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 2A 1ST END |
| THREAD CLASS | 2B AND 2A 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD QUANTITY PER INCH | 16 2ND END |
| THREAD SERIES DESIGNATOR | UNF AND UN 2ND END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |