| OUTSIDE DIAMETER | 1.109 INCHES NOMINAL |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 90.0 |
| FLOW ANGLE | 45.0 DEGREES 1ST END |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| MINIMUM INSIDE BENDING RADIUS | 7.380 INCHES |
| MAXIMUM OPERATING PRESSURE | 1250.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| THREAD QUANTITY PER INCH | 12 2ND END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 2ND END |
| THREAD CLASS | 3B 1ST END |
| THREAD CLASS | 3B 2ND END |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| INSIDE DIAMETER | 0.875 INCHES NOMINAL |
| VACUUM IN TORR | 50.8 |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| NOMINAL THREAD SIZE | 1.312 INCHES 1ST END |
| NOMINAL THREAD SIZE | 1.312 INCHES 2ND END |
| INSIDE SURFACE CONDITION | SMOOTH |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| MEASURING METHOD AND LENGTH | 21.500 INCHES NOMINAL WORKING |
| END CONNECTION DESIGN | ELBOW 1ST END |
| END CONNECTION DESIGN | ELBOW 2ND END |
| BURST TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| THREAD SERIES DESIGNATOR | UN 1ST END |
| THREAD SERIES DESIGNATOR | UN 2ND END |