| END CONNECTION DESIGN | ELBOW 1ST END |
| END CONNECTION DESIGN | ELBOW 2ND END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 180.0 |
| BURST TEST PRESSURE | 1200.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CONNECTION STYLE | SWIVEL NUT, FLARELESS 1ST END |
| CONNECTION STYLE | SWIVEL NUT, FLARELESS 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| FLOW ANGLE | 45.0 DEGREES 1ST END |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| HYDROSTATIC TEST PRESSURE | 500.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.250 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | CONVOLUTED |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| MAXIMUM OPERATING PRESSURE | 300.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 20.500 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | FLUID SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 0.500 INCHES |
| NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.438 INCHES 2ND END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| SEAT ANGLE | 12.0 DEGREES 1ST END |
| SEAT ANGLE | 12.0 DEGREES 2ND END |
| TEMP RATING | -65.0 FAHRENHEIT AND 350.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD CLASS | 3B 2ND END |
| THREAD CLASS | 3B 1ST END |
| THREAD SERIES DESIGNATOR | UNJF 2ND END |
| THREAD SERIES DESIGNATOR | UNJF 1ST END |