| END CONNECTION DESIGN | STRAIGHT 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | NATURAL |
| HYDROSTATIC TEST PRESSURE | 200.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 1.968 INCHES MINIMUM AND 2.080 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| OUTSIDE DIAMETER | 2.718 INCHES MINIMUM AND 2.906 INCHES MAXIMUM |
| MAXIMUM OPERATING PRESSURE | 100.0 POUNDS PER SQUARE INCH |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON AND AIR AND WATER, FRESH SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 20.000 INCHES |
| NOMINAL THREAD SIZE | 2.500 INCHES 1ST END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| TEMP RATING | -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE |
| TEST DATA DOCUMENT | 10001-1550309 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD CLASS | 2B 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| THREAD QUANTITY PER INCH | 12 1ST END |