| VACUUM IN TORR | 50.8 |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 2ND END |
| TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B 1ST END |
| THREAD CLASS | 3B 2ND END |
| OUTSIDE DIAMETER | 1.031 INCHES NOMINAL |
| NOMINAL THREAD SIZE | 1.312 INCHES 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| INSIDE DIAMETER | 0.875 INCHES NOMINAL |
| CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| INSIDE SURFACE CONDITION | SMOOTH |
| SPECIFICATION/STANDARD DATA | 10001-64A90B51-1 MANUFACTURERS SOURCE CONTROL |
| OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| MEASURING METHOD AND LENGTH | 45.000 INCHES NOMINAL WORKING |
| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| THREAD SERIES DESIGNATOR | UNJ 1ST END |
| THREAD SERIES DESIGNATOR | UNJ 2ND END |
| BURST TEST PRESSURE | 4200.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| MINIMUM INSIDE BENDING RADIUS | 9.000 INCHES |
| THREAD QUANTITY PER INCH | 12 1ST END |
| THREAD QUANTITY PER INCH | 12 2ND END |
| HYDROSTATIC TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |