| END CONNECTION DESIGN | ELBOW 1ST END |
| END FLANGE CONSTRUCTION | SPLIT 1ST END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 180.0 |
| BOLT HOLE DIAMETER | 0.469 INCHES NOMINAL 1ST END |
| BOLT HOLE QUANTITY | 4 1ST END |
| BURST TEST PRESSURE | 500.0 POUNDS PER SQUARE INCH |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.180 INCHES NOMINAL 1ST END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.312 INCHES NOMINAL 1ST END |
| CONNECTION STYLE | RAISED SWIVEL W/ GASKET GROOVE 1ST END |
| CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | SELF-SEALING |
| FLANGE LENGTH | 3.120 INCHES NOMINAL 1ST END |
| FLANGE THICKNESS | 0.560 INCHES NOMINAL 1ST END |
| FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 1ST END |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| FLANGE WIDTH | 2.874 INCHES NOMINAL 1ST END |
| INSIDE DIAMETER | 1.125 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD |
| OUTER COVERING ENVIRONMENTAL PROTECTION | MILDEW RESISTANT AND OIL RESISTANT |
| MAXIMUM OPERATING PRESSURE | 125.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 190.000 INCHES MINIMUM WORKING AND 194.000 INCHES MAXIMUM WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 9.000 INCHES |
| RAISED FACE DIAMETER | 2.000 INCHES NOMINAL 1ST END |
| RAISED FACE HEIGHT | 0.020 INCHES NOMINAL 1ST END |
| SPECIAL FEATURES | LONG TANGENT STYLE ELBOW ON ONE END |
| TEMP RATING | -25.0 FAHRENHEIT AND 150.0 FAHRENHEIT SINGLE RESPONSE |