| END CONNECTION DESIGN | ELBOW 1ST END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 180.0 |
| BOLT HOLE QUANTITY | 4 1ST END |
| BOLT HOLE DIAMETER | 0.275 INCHES NOMINAL 1ST END |
| BURST TEST PRESSURE | 2800.0 POUNDS PER SQUARE INCH |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 2.150 INCHES NOMINAL 1ST END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.150 INCHES NOMINAL 1ST END |
| CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| CONNECTION STYLE | RAISED SWIVEL 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | NATURAL |
| FLANGE LENGTH | 2.413 INCHES NOMINAL 1ST END |
| FLANGE THICKNESS | 0.200 INCHES NOMINAL 1ST END |
| FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 1ST END |
| FLANGE WIDTH | 2.413 INCHES NOMINAL 1ST END |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| HYDROSTATIC TEST PRESSURE | 1200.0 POUNDS PER SQUARE INCH |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING PRESSURE | 600.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 38.000 INCHES NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 16.000 INCHES |
| OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| OUTSIDE DIAMETER | 1.160 INCHES NOMINAL |
| RAISED FACE DIAMETER | 1.500 INCHES NOMINAL 1ST END |
| RAISED FACE HEIGHT | 0.025 INCHES NOMINAL 1ST END |
| SPECIAL FEATURES | SECOND END HAS HEEL INLET-THD EXTERNAL TUBE UNF 0.438-20 RH 2A. SECOND END HAS A PREFORMED 0.875 IN. ID CRES TUBE BETWEEN HOSE AND END FITTING |
| TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 400.0 DEG FAHRENHEIT SINGLE RESPONSE |