| CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| RAISED FACE FLANGE 2ND END |
| MEASURING METHOD AND LENGTH | 12.250 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND |
| 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND |
| OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| MINIMUM INSIDE BENDING RADIUS | 11.000 INCHES |
| FLANGE THICKNESS | 0.297 INCHES NOMINAL 1ST END |
| 0.297 INCHES NOMINAL 2ND END |
| INSIDE DIAMETER | 1.125 INCHES NOMINAL |
| OUTSIDE DIAMETER | 1.344 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | RAISED SWIVEL 1ST END |
| RAISED SWIVEL 2ND END |
| RAISED FACE HEIGHT | 0.010 INCHES MINIMUM AND |
| 0.020 INCHES MAXIMUM 1ST END |
| 0.010 INCHES MINIMUM AND |
| 0.020 INCHES MAXIMUM 2ND END |
| RAISED FACE DIAMETER | 1.839 INCHES MINIMUM AND |
| 1.844 INCHES MAXIMUM 1ST END |
| 1.839 INCHES MINIMUM AND |
| 1.844 INCHES MAXIMUM 2ND END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| SOLID 2ND END |
| FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 1ST END |
| RECTANGULAR (INCLUDES SQUARE) 2ND END |
| BOLT HOLE DIAMETER | 0.266 INCHES NOMINAL 1ST END |
| 0.266 INCHES NOMINAL 2ND END |
| FLANGE LENGTH | 2.188 INCHES NOMINAL 1ST END |
| 2.188 INCHES NOMINAL 2ND END |
| FLANGE WIDTH | 2.188 INCHES NOMINAL 1ST END |
| 2.188 INCHES NOMINAL 2ND END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.656 INCHES NOMINAL 1ST END |
| 1.656 INCHES NOMINAL 2ND END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.656 INCHES NOMINAL 1ST END |
| 1.656 INCHES NOMINAL 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| BOLT HOLE QUANTITY | 4 1ST END |
| 4 2ND END |
| SPECIAL FEATURES | HOSE PREFORMED TO A 3.688 IN. BEND RADIUS 6.469 IN. FROM FIRST END |