| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.812 INCHES NOMINAL 2ND END |
| CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| CONNECTION TYPE | PLAIN FACE FLANGE 2ND END |
| CONNECTION STYLE | PLAIN SWIVEL 1ST END |
| CONNECTION STYLE | PLAIN SWIVEL 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| FLANGE LENGTH | 2.375 INCHES NOMINAL 1ST END |
| FLANGE LENGTH | 2.375 INCHES NOMINAL 2ND END |
| FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 1ST END |
| FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 2ND END |
| FLANGE WIDTH | 2.375 INCHES NOMINAL 1ST END |
| FLANGE WIDTH | 2.375 INCHES NOMINAL 2ND END |
| FLOW ANGLE | 120.0 DEGREES 2ND END |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| INSIDE DIAMETER | 1.375 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD |
| HYDROSTATIC TEST PRESSURE | 375.0 POUNDS PER SQUARE INCH |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING PRESSURE | 250.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 19.375 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 11.000 INCHES |
| OUTER COVERING ENVIRONMENTAL PROTECTION | MILDEW RESISTANT AND OIL RESISTANT |
| OUTSIDE DIAMETER | 1.750 INCHES NOMINAL |
| END CONNECTION DESIGN | ELBOW 1ST END |
| END CONNECTION DESIGN | ELBOW 2ND END |
| END FLANGE CONSTRUCTION | SPLIT 1ST END |
| END FLANGE CONSTRUCTION | SPLIT 2ND END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 4.0 |
| BOLT HOLE QUANTITY | 4 1ST END |
| BOLT HOLE QUANTITY | 4 2ND END |
| BOLT HOLE DIAMETER | 0.266 INCHES NOMINAL 1ST END |
| BOLT HOLE DIAMETER | 0.266 INCHES NOMINAL 2ND END |
| BURST TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.812 INCHES NOMINAL 1ST END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.812 INCHES NOMINAL 2ND END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.812 INCHES NOMINAL 1ST END |