| CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| MEASURING METHOD AND LENGTH | 36.750 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND |
| 190.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 300.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 450.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 600.0 POUNDS PER SQUARE INCH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER POLYTETRAFLUOROETHYLENE IMPREGNATED GLASS FIBER AND |
| 2ND LAYER MOLDED POLYTETRAFLUOROETHYLENE AND |
| OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| MINIMUM INSIDE BENDING RADIUS | 4.500 INCHES |
| FLANGE THICKNESS | 0.359 INCHES NOMINAL 1ST END |
| INSIDE DIAMETER | 1.500 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | RAISED SWIVEL 1ST END |
| RAISED FACE DIAMETER | 2.135 INCHES NOMINAL 1ST END |
| END FLANGE CONSTRUCTION | SPLIT 1ST END |
| FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 1ST END |
| BOLT HOLE DIAMETER | 0.266 INCHES NOMINAL 1ST END |
| FLANGE LENGTH | 2.375 INCHES NOMINAL 1ST END |
| FLANGE WIDTH | 2.375 INCHES NOMINAL 1ST END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.812 INCHES NOMINAL 1ST END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.812 INCHES NOMINAL 1ST END |
| END CONNECTION DESIGN | ELBOW 1ST END |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 270.0 |
| BOLT HOLE QUANTITY | 4 1ST END |