|
|
|
National Stock Number:
4720-01-050-9164
Federal Supply Class:
4720
National Item Identification Number:
010509164
Description:
HOSE ASSEMBLY,NONMETALLIC
Detail:
A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see HOSE, NONMETALLIC. Excludes HOSE ASSEMBLY, AIR DUCT; and HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
|
Manufacturer Information:
| 4720PL0887119 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 4720PL1731987 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | AE4622E0063-000 | 00624 | EATON AEROQUIP LLC | | AS166C14-0063H | 00624 | EATON AEROQUIP LLC | | C7912C12-0063H | 81755 | LOCKHEED MARTIN CORPORATION | | 4720PL1809228 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | S82804-0063H O | 78570 | SMITHS TUBULAR SYSTEMS-LACONIA, INC. | | S82804-0063H000 | 78570 | SMITHS TUBULAR SYSTEMS-LACONIA, INC. | | S828040063HO | 78570 | SMITHS TUBULAR SYSTEMS-LACONIA, INC. | | C7912C14-0063H | 81755 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| END CONNECTION DESIGN | ELBOW 1ST END | | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 0.0 | | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END | | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END | | CROSS-SECTIONAL SHAPE STYLE | ROUND | | FLOW ANGLE | 90.0 DEGREES 1ST END | | INSIDE DIAMETER | 0.602 INCHES MINIMUM | | INSIDE SURFACE CONDITION | SMOOTH | | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE | | OUTSIDE DIAMETER | 1.112 INCHES MAXIMUM | | MEASURING METHOD AND LENGTH | 6.250 INCHES MINIMUM WORKING AND 6.500 INCHES MAXIMUM WORKING | | MINIMUM INSIDE BENDING RADIUS | 4.000 INCHES | | NOMINAL THREAD SIZE | 1.062 INCHES 1ST END | | SEAT ANGLE | 37.0 DEGREES 1ST END | | SPECIAL FEATURES | TWO 0.047 IN. DIA LOCKWIRE HOLES ON EACH NUT | | SPECIFICATION/STANDARD DATA | 81755--510 MANUFACTURERS SPECIFICATION CONTROL | | TEMP RATING | -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT SINGLE RESPONSE | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD CLASS | 3B 1ST END | | THREAD SERIES DESIGNATOR | UNJ 1ST END | | THREAD QUANTITY PER INCH | 12 1ST END |
|
|