4720-01-122-4276 HOSE ASSEMBLY,NONMETALLIC Index 4720-01-122-4278 HOSE ASSEMBLY,NONMETALLIC

National Stock Number:
4720-01-122-4277

Federal Supply Class:
4720

National Item Identification Number:
011224277

Description:
HOSE ASSEMBLY,NONMETALLIC

Detail:
A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see HOSE, NONMETALLIC. Excludes HOSE ASSEMBLY, AIR DUCT; and HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.


Manufacturer Information:
AE704927-100624EATON AEROQUIP LLC


Techincal Specification:
END CONNECTION DESIGNSTRAIGHT 1ST END
END CONNECTION DESIGNSTRAIGHT 2ND END
END FLANGE CONSTRUCTIONSOLID 1ST END
END FLANGE CONSTRUCTIONSOLID 2ND END
BOLT HOLE DIAMETER0.205 INCHES NOMINAL 2ND END
BOLT HOLE DIAMETER0.266 INCHES NOMINAL 1ST END
BOLT HOLE QUANTITY4 1ST END
BOLT HOLE QUANTITY4 2ND END
BURST TEST PRESSURE3000.0 POUNDS PER SQUARE INCH
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.312 INCHES NOMINAL 2ND END
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.812 INCHES NOMINAL 1ST END
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.312 INCHES NOMINAL 2ND END
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.812 INCHES NOMINAL 1ST END
CONNECTION TYPEPLAIN FACE FLANGE 1ST END
CONNECTION TYPEPLAIN FACE FLANGE 2ND END
CONNECTION STYLEPLAIN SWIVEL 1ST END
CONNECTION STYLEPLAIN SWIVEL 2ND END
CROSS-SECTIONAL SHAPE STYLEROUND
FLANGE LENGTH1.750 INCHES NOMINAL 2ND END
FLANGE LENGTH2.375 INCHES NOMINAL 1ST END
FLANGE THICKNESS0.234 INCHES NOMINAL 2ND END
FLANGE THICKNESS0.297 INCHES NOMINAL 1ST END
FLANGE STYLERECTANGULAR (INCLUDES SQUARE) 1ST END
FLANGE STYLERECTANGULAR (INCLUDES SQUARE) 2ND END
FLANGE WIDTH1.750 INCHES NOMINAL 2ND END
FLANGE WIDTH2.375 INCHES NOMINAL 1ST END
HYDROSTATIC TEST PRESSURE1500.0 POUNDS PER SQUARE INCH
INSIDE DIAMETER0.844 INCHES MINIMUM
INSIDE SURFACE CONDITIONSMOOTH
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
MAXIMUM OPERATING PRESSURE750.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH10.562 INCHES MINIMUM OVERALL AND 10.938 INCHES MAXIMUM OVERALL
MEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON SINGLE RESPONSE
MINIMUM INSIDE BENDING RADIUS5.500 INCHES
OUTSIDE DIAMETER1.175 INCHES MAXIMUM
TEMP RATING-65.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE


Click here to Register for Free 30-day Trial