| END CONNECTION DESIGN | STRAIGHT FIRST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| BURST TEST PRESSURE | 600.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | BLUE |
| HYDROSTATIC TEST PRESSURE | 300.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 1.500 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| ITEM STRUCTURAL COMPOSITION | BRAIDED TEXTILE YARN THIRD LAYER |
| ITEM STRUCTURAL COMPOSITION | BRAIDED TEXTILE YARN FIRST LAYER |
| ITEM STRUCTURAL COMPOSITION | BRAIDED WIRE SECOND LAYER |
| ITEM STRUCTURAL COMPOSITION | MOLDED RUBBER, CHLOROPRENE OUTER LAYER |
| OPERATING PRESSURE | 150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT |
| OUTSIDE DIAMETER | 2.080 INCHES NOMINAL |
| MEASURING METHOD AND LENGTH | 104.000 INCHES NOMINAL OVERALL |
| MINIMUM INSIDE BENDING RADIUS | 10.000 INCHES |
| NOMINAL THREAD SIZE | 1.875 INCHES FIRST END |
| SEAT ANGLE | 37.0 DEGREES FIRST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, POLYETHYLENE |
| SPECIFICATION/STANDARD DATA | SAE J517,100R4 SIZE 24-81343 NATIONAL STD/SPEC |
| TEMP RATING | -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B FIRST END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD QUANTITY PER INCH | 12 FIRST END |
| THREAD SERIES DESIGNATOR | UN FIRST END |