| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| END FLANGE CONSTRUCTION | SOLID 2ND END |
| BURST TEST PRESSURE | 20000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| CONNECTION TYPE | PLAIN FACE FLANGE 2ND END |
| CONNECTION STYLE | PLAIN 1ST END |
| CONNECTION STYLE | PLAIN 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLANGE OUTSIDE DIAMETER | 1.750 INCHES NOMINAL 2ND END |
| FLANGE OUTSIDE DIAMETER | 1.750 INCHES NOMINAL 1ST END |
| FLANGE STYLE | ROUND W/ OUT BOLT HOLES 1ST END |
| FLANGE STYLE | ROUND W/ OUT BOLT HOLES 2ND END |
| FLOW ANGLE | 45.0 DEGREES 2ND END |
| INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND 3RD LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND 4TH LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| OUTSIDE DIAMETER | 1.510 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 36.000 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 14.000 INCHES |
| TEMP RATING | -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE |