| END CONNECTION DESIGN | ELBOW 1ST END |
| END CONNECTION DESIGN | ELBOW 2ND END |
| END FLANGE CONSTRUCTION | SOLID 2ND END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 0.0 |
| BURST TEST PRESSURE | 20000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| CONNECTION TYPE | PLAIN FACE FLANGE 2ND END |
| CONNECTION STYLE | PLAIN 1ST END |
| CONNECTION STYLE | PLAIN 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLANGE OUTSIDE DIAMETER | 1.000 INCHES NOMINAL 1ST END |
| FLANGE OUTSIDE DIAMETER | 1.250 INCHES NOMINAL 2ND END |
| FLANGE STYLE | ROUND W/ OUT BOLT HOLES 1ST END |
| FLANGE STYLE | ROUND W/ OUT BOLT HOLES 2ND END |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID STEEL WIRE AND 2ND LAYER SPIRALLY LAID STEEL WIRE AND 3RD LAYER SPIRALLY LAID STEEL WIRE AND 4TH LAYER SPIRALLY LAID STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| OUTSIDE DIAMETER | 1.520 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 40.500 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 14.000 INCHES |
| TEMP RATING | -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE |