| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| INSIDE DIAMETER | 0.212 INCHES NOMINAL |
| NOMINAL THREAD SIZE | 0.437 INCHES 1ST END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | WATER RESISTANT AND HEAT RESISTANT |
| OUTSIDE DIAMETER | 0.390 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 20.000 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 1.500 INCHES |
| SEAT ANGLE | 12.0 DEGREES 1ST END |
| SPECIAL FEATURES | C/O THIN WALL POLYTETRAFLUOROETHYLENE INNER TUBE AND HI-PAC OUTER BRAID CONSISTING OF DENSELY PACKED SMALL DIAMETER STAINLESS STEEL WIRES BRAID IN A UNIFORM PATTERN |
| TEMP RATING | -67.0 DEG FAHRENHEIT AND 400.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD SERIES DESIGNATOR | UNJF 1ST END |