| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| BURST TEST PRESSURE | 1400.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM AND COMPLETE FITTING ZINC 1ST END |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| INSIDE DIAMETER | 0.500 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE |
| LAYER COMPOSITION AND LOCATION | 3RD LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING PRESSURE | 3500.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 920.0 MILLIMETERS NOMINAL EXCLUDING END FITTINGS |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID, WATER BASE SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 7.000 INCHES |
| NOMINAL THREAD SIZE | 0.750 INCHES 2ND END |
| NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT |
| OUTSIDE DIAMETER | 0.938 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 2ND END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| SPECIFICATION/STANDARD DATA | SAE J517,100R2-81343 NATIONAL STD/SPEC |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B 1ST END |
| THREAD CLASS | 3B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| THREAD SERIES DESIGNATOR | UNF 2ND END |