| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CONNECTION STYLE | SWIVEL NUT, INVERTED FLARE 1ST END |
| CONNECTION STYLE | SWIVEL NUT, INVERTED FLARE 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLOW ANGLE | 45.0 DEGREES 2ND END |
| HYDROSTATIC TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.173 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| OUTSIDE DIAMETER | 0.640 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 34.000 INCHES NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 2.000 INCHES |
| NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.438 INCHES 2ND END |
| NONDEFINITIVE SPEC/STD DATA | 1 CLASS |
| OUTER COVERING ENVIRONMENTAL PROTECTION | WATERPROOF |
| SEAT ANGLE | 8.5 DEGREES 1ST END |
| SEAT ANGLE | 8.5 DEGREES 2ND END |
| SPECIFICATION/STANDARD DATA | 81349-MIL-H-25579 GOVERNMENT SPECIFICATION |
| SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL;THE CURRENT APPROVED SOURCES; 00624 HAVE INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984;THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| TEMP RATING | -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD CLASS | 2B 2ND END |
| THREAD CLASS | 2B 1ST END |
| THREAD SERIES DESIGNATOR | UNF 2ND END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |