| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | BLACK |
| FEATURES PROVIDED | REUSABLE END FITTINGS |
| HYDROSTATIC TEST PRESSURE | 2.000 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.406 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | ROUGH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED FABRIC AND OUTER LAYER RUBBER IMPREGNATED FABRIC |
| OUTSIDE DIAMETER | 0.714 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 160.000 INCHES NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 1.750 INCHES |
| NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| NONDEFINITIVE SPEC/STD DATA | 3 TYPE AND 13/32IN. SIZE |
| OUTER COVERING ENVIRONMENTAL PROTECTION | MILDEW RESISTANT AND OIL RESISTANT AND VIBRATION RESISTANT |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIFICATION/STANDARD DATA | 81349-MIL-H-13444 GOVERNMENT SPECIFICATION |
| SUPPLEMENTARY FEATURES | LOW PRESSURE PUSH LOCK HOSE FITTING DESIGN /NO CRIMP/SLEEVE/ |
| TEMP RATING | -40.0 CELSIUS AND 93.0 CELSIUS SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD CLASS | 2B 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |