| END CONNECTION DESIGN | ELBOW 1ST END |
| END CONNECTION DESIGN | ELBOW 2ND END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 150.0 |
| BOLT HOLE DIAMETER | 0.266 INCHES NOMINAL 1ST END |
| BOLT HOLE QUANTITY | 4 1ST END |
| BURST TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.656 INCHES NOMINAL 1ST END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.656 INCHES NOMINAL 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| CONNECTION STYLE | PLAIN SWIVEL 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLANGE LENGTH | 2.188 INCHES NOMINAL 1ST END |
| FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 1ST END |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| FLANGE WIDTH | 2.188 INCHES NOMINAL 1ST END |
| HYDROSTATIC TEST PRESSURE | 1300.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 1.125 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| OUTSIDE DIAMETER | 1.437 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 500.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 18.375 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 8.000 INCHES |
| NOMINAL THREAD SIZE | 1.625 INCHES 2ND END |
| SEAT ANGLE | 37.0 DEGREES 2ND END |
| TEMP RATING | -65.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | UNJF 2ND END |