| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| BURST TEST PRESSURE | 30000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED EXTERNAL PIPE 1ST END |
| CONNECTION STYLE | INVERTED FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| HYDROSTATIC TEST PRESSURE | 15000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.380 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID STEEL WIRE AND 2ND LAYER SPIRALLY LAID STEEL WIRE AND 3RD LAYER SPIRALLY LAID STEEL WIRE AND 4TH LAYER SPIRALLY LAID STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| OUTSIDE DIAMETER | 0.940 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 7500.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 10.000 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 6.000 INCHES |
| NOMINAL THREAD SIZE | 0.375 INCHES 1ST END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND WEATHERPROOF |
| SEAT ANGLE | 30.0 DEGREES 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| SPECIFICATION/STANDARD DATA | SAE J517,100R10,TYPE A-81343 NATIONAL STD/SPEC |
| TEMP RATING | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD SERIES DESIGNATOR | NPT 1ST END |