| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| THREADED INTERNAL TUBE 2ND END |
| MEASURING METHOD AND LENGTH | 13.450 INCHES MINIMUM WORKING AND |
| 13.700 INCHES MAXIMUM WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND |
| 400.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 750.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| MINIMUM INSIDE BENDING RADIUS | 7.500 INCHES |
| INSIDE DIAMETER | 1.490 INCHES NOMINAL |
| OUTSIDE DIAMETER | 1.820 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | CONVOLUTED |
| CONNECTION STYLE | SWIVEL NUT, INVERTED FLARE 1ST END |
| SWIVEL NUT, INVERTED FLARE 2ND END |
| SEAT ANGLE | 8.5 DEGREES 1ST END |
| 8.5 DEGREES 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 79.0 DEGREES 2ND END |
| THREAD SERIES DESIGNATOR | UNJS 1ST END |
| UNJS 2ND END |
| NOMINAL THREAD SIZE | 1.844 INCHES 1ST END |
| 1.844 INCHES 2ND END |
| THREAD QUANTITY PER INCH | 14 1ST END |
| 14 2ND END |
| THREAD CLASS | 3B 1ST END |
| 3B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| FEATURES PROVIDED | NUTS DRILLED FOR LOCKWIRE |
| SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL;THE CURRENT APPROVED SOURCES,00624 HAVE INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984,THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |