| OUTSIDE DIAMETER | 1.987 INCHES MAXIMUM |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 2ND END |
| SPECIAL FEATURES | USED ON NORTHROP CORP.,B-2 DIV.,HYDRAULIC PUMP SYSTEM |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B 1ST END |
| THREAD CLASS | 3B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD QUANTITY PER INCH | 12 2ND END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| THREAD SERIES DESIGNATOR | UN 1ST END |
| THREAD SERIES DESIGNATOR | UN 2ND END |
| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY AND REUSABLE END FITTINGS |
| FLOW ANGLE | 45.0 DEGREES 2ND END |
| INSIDE DIAMETER | 1.344 INCHES MINIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| PROPRIETARY CHARACTERISTICS | PACS |
| MEASURING METHOD AND LENGTH | 30.470 INCHES NOMINAL OVERALL |
| MINIMUM INSIDE BENDING RADIUS | 14.000 INCHES |
| NOMINAL THREAD SIZE | 1.875 INCHES 1ST END |
| NOMINAL THREAD SIZE | 1.875 INCHES 2ND END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ACID RESISTANT AND ALCOHOL RESISTANT AND FUEL RESISTANT AND OIL RESISTANT AND SOLVENT RESISTANT AND VIBRATION RESISTANT |