| END CONNECTION DESIGN | ELBOW 1ST END |
| END CONNECTION DESIGN | ELBOW 2ND END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 0.0 |
| BURST TEST PRESSURE | 360.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLOW ANGLE | 45.0 DEGREES 2ND END |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| INSIDE DIAMETER | 0.500 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED STEEL WIRE |
| MAXIMUM OPERATING PRESSURE | 180.0 POUNDS PER SQUARE INCH |
| MEDIA FOR WHICH DESIGNED | LIQUID, INGESTED SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 9.550 INCHES NOMINAL WORKING |
| NOMINAL THREAD SIZE | 0.7188 INCHES 1ST END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| SPECIAL FEATURES | METAL LABEL MUST HAVE ST9M389C STAMPED ON IT.INTERNAL LIP SEAL FITTING,BOTH ENDS. |
| TEMP RATING | -55.0 CELSIUS AND 90.0 CELSIUS SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD CLASS | 3A 1ST END |
| THREAD SERIES DESIGNATOR | UNJS 1ST END |
| THREAD QUANTITY PER INCH | 20 1ST END |