| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| END FLANGE CONSTRUCTION | SOLID 2ND END |
| BOLT HOLE QUANTITY | 4 2ND END |
| BOLT HOLE DIAMETER | 0.406 INCHES NOMINAL 2ND END |
| BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.062 INCHES NOMINAL 2ND END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.960 INCHES NOMINAL 2ND END |
| CONNECTION TYPE | PLAIN FACE FLANGE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | PLAIN 2ND END |
| CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLANGE LENGTH | 2.780 INCHES NOMINAL 2ND END |
| FLANGE THICKNESS | 0.315 INCHES NOMINAL 2ND END |
| FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 2ND END |
| FLANGE WIDTH | 2.220 INCHES NOMINAL 2ND END |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER SPIRALLY LAID STEEL WIRE |
| LAYER COMPOSITION AND LOCATION | 3RD LAYER SPIRALLY LAID STEEL WIRE |
| LAYER COMPOSITION AND LOCATION | 4TH LAYER SPIRALLY LAID STEEL WIRE |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID STEEL WIRE |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| HYDROSTATIC TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 55.000 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 12.000 INCHES |
| NOMINAL THREAD SIZE | 1.438 INCHES 1ST END |
| OUTSIDE DIAMETER | 1.480 INCHES NOMINAL |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| THREAD SERIES DESIGNATOR | UN 1ST END |